Configuration
| Cisco 1600
|
| Hostname |
BVI IP |
Location |
Notes
|
| PDAP-1 |
10.2.1.1 |
|
|
| PDAP-2 |
10.2.1.2 |
|
|
| PDAP-3 |
10.2.1.3 |
|
|
| PDAP-4 |
10.2.1.4 |
|
|
| PDAP-5 |
10.2.1.5 |
|
|
| PDAP-6 |
10.2.1.6 |
|
|
| PDAP-7 |
10.2.1.7 |
|
|
| PDAP-8 |
10.2.1.8 |
|
|
| PDAP-9 |
10.2.1.9 |
|
|
| PDAP-10 |
10.2.1.10 |
|
|
| PDAP-11 |
10.2.1.11 |
|
|
| PDAP-12 |
10.2.1.12 |
|
|
| PDAP-13 |
10.2.1.13 |
|
|
| PDAP-14 |
10.2.1.14 |
|
|
| PDAP-15 |
10.2.1.15 |
|
|
| PDAP-16 |
10.2.1.16 |
|
|
| PDAP-17 |
10.2.1.17 |
|
|
| PDAP-18 |
10.2.1.18 |
|
|
| PDAP-19 |
10.2.1.19 |
|
|
| PDAP-20 |
10.2.1.20 |
|
|
| Cisco 702W
|
| Hostname |
BVI IP |
Location |
Notes
|
| PDAP-30 |
10.2.1.30 |
|
|
| PDAP-31 |
10.2.1.31 |
|
|
| PDAP-32 |
10.2.1.32 |
|
|
| PDAP-33 |
10.2.1.33 |
|
|
| PDAP-34 |
10.2.1.34 |
|
|
| PDAP-35 |
10.2.1.35 |
|
|
| PDAP-36 |
10.2.1.36 |
|
|
| PDAP-37 |
10.2.1.37 |
|
|
| PDAP-38 |
10.2.1.38 |
|
|
| PDAP-39 |
10.2.1.39 |
|
|
Configuring 1600
PDCREW and PD_PUBLIC on the 2.4GHz radio, PD_BACK on 5GHz for mesh
- Process, copy the config below, edit it to replace the AP name and BVI address to match. Set the passwords
- Connect to the AP via the console port
- `enable` to get control
- `write erase` to clear the existing config
- `reload` confirm when promted. You do not want to copy any changes if asked
- when the AP has restarted, once again `enable`
- `conf t` to enter config mode
- paste in your config
- `write mem` to save the config
- wait for about a minute you should see chatter about the radio doing things
hostname PDAP-18
!
!
!
dot11 syslog
dot11 vlan-name BACKHAUL vlan 1
dot11 vlan-name CREW vlan 12
dot11 vlan-name PUBLIC vlan 13
!
dot11 ssid PDCREW
vlan 12
authentication open
authentication key-management wpa
mbssid guest-mode
wpa-psk ascii *****
!
dot11 ssid PD_BACK
authentication open
authentication key-management wpa
infrastructure-ssid
wpa-psk ascii *****
!
dot11 ssid PD_PUBLIC
vlan 13
authentication open
mbssid guest-mode
!
!
dot11 network-map
dot11 guest
!
!
bridge irb
!
!
!
interface Dot11Radio0
no ip address
!
encryption vlan 1 mode ciphers tkip
!
encryption vlan 12 mode ciphers tkip
!
ssid PDCREW
!
ssid PD_PUBLIC
!
mbssid
world-mode dot11d country-code GB outdoor
speed range
power local maximum
station-role root access-point
!
interface Dot11Radio0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Dot11Radio0.12
encapsulation dot1Q 12
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Dot11Radio0.13
encapsulation dot1Q 13
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Dot11Radio1
no ip address
!
encryption mode ciphers tkip
!
ssid PD_BACK
!
world-mode dot11d country-code GB outdoor
speed range
power local maximum
station-role root access-point fallback repeater
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
!
interface BVI1
ip address 10.2.1.18 255.0.0.0
no ip route-cache
!
bridge 1 protocol ieee
bridge 1 route ip
!
interface dot11Radio 0
no shut
interface dot11Radio 1
no shut
interface BVI 1
no shut
interface GigabitEthernet0
no shut
end
Config file 702
Dot11 ssid PDCREW
authentication open
authentication key-management wpa
wpa-psk ascii ******
Guest-mode
Exit
Int dot11 0
world-mode dot11d country-code GB outdoor
speed range
power local maximum
encryption mode ciphers tkip
dot11 extension aironet
ssid PDCREW
Stat root access
No shut
Exit
Int dot11 1
world-mode dot11d country-code GB outdoor
speed range
power local maximum
encryption mode ciphers tkip
dot11 extension aironet
ssid PDCREW
station-role root access-point
No shut
exit