Wireless-New
| Line 33: | Line 33: | ||
| PDAP-13|| 10.2.1.13 || ac7e.8a9b.df00/ac7e.8aa3.d460 || || | | PDAP-13|| 10.2.1.13 || ac7e.8a9b.df00/ac7e.8aa3.d460 || || | ||
|- | |- | ||
| PDAP-14|| 10.2.1.14 || ac7e.8a69.c250/ac7e.8a65.c210 || | | PDAP-14|| 10.2.1.14 || ac7e.8a69.c250/ac7e.8a65.c210 || Regio || Root | ||
|- | |- | ||
| PDAP-15|| 10.2.1.15 || ac7e.8a9b.da30/ac7e.8aa3.cf90 || || | | PDAP-15|| 10.2.1.15 || ac7e.8a9b.da30/ac7e.8aa3.cf90 || || | ||
Revision as of 09:13, 21 April 2023
Configuration
Server room IP 10.1.0.202
| Cisco 1600 | ||||
|---|---|---|---|---|
| Hostname | BVI IP | MAC Address | Location | Notes |
| PDAP-1 | 10.2.1.1 | ac7e.8a9b.e1f0/5897.bddd.7634 | ||
| PDAP-2 | 10.2.1.2 | 5897.bdb5.e6e8 | Wintermark Toilets | Root |
| PDAP-3 | 10.2.1.3 | ac7e.8a9b.d320/ac7e.8aa3.c880 | Sentinel gate | |
| PDAP-4 | 10.2.1.4 | ac7e.8a9b.d790/ac7e.8aa3.ccf0 | monster room | |
| PDAP-5 | 10.2.1.5 | ac7e.8a69.c1c0/ac7e.8a65.c180 | ||
| PDAP-6 | 10.2.1.6 | ac7e.8a9b.d2a0/ac7e.8aa3.c7f0 | God | |
| PDAP-7 | 10.2.1.7 | 5897.bddd.7542 | Navarr toilet | Root |
| PDAP-8 | 10.2.1.8 | 44ad.d9e5.bce0/44ad.d9e9.bb50 | ||
| PDAP-9 | 10.2.1.9 | ac7e.8a69.be80/ac7e.8a65.be40 | ||
| PDAP-10 | 10.2.1.10 | Navarr woods | Root | |
| PDAP-11 | 10.2.1.11 | ac7e.8a9b.d280/ac7e.8aa3.c7d0 | MC | |
| PDAP-12 | 10.2.1.12 | ac7e.8a9a.1cc0/ac7e.8aa2.1230 | ||
| PDAP-13 | 10.2.1.13 | ac7e.8a9b.df00/ac7e.8aa3.d460 | ||
| PDAP-14 | 10.2.1.14 | ac7e.8a69.c250/ac7e.8a65.c210 | Regio | Root |
| PDAP-15 | 10.2.1.15 | ac7e.8a9b.da30/ac7e.8aa3.cf90 | ||
| PDAP-16 | 10.2.1.16 | ac7e.8aa8.16e0/ac7e.8aaa.16f0 | ||
| PDAP-17 | 10.2.1.17 | 04da.d2cf.a330/04da.d2d1.a150 | Hub | |
| PDAP-18 | 10.2.1.18 | ac7e.8a69.b010/5897.bdb5.e6e7 | Bar | |
| PDAP-19 | 10.2.1.19 | 0c27.24e1.8d10/0c27.24e3.8d00 | Ali cave | |
| PDAP-20 | 10.2.1.20 | 04da.d28a.0ca0/04da.d28c.0cd0 |
| Cisco 702W | |||||
|---|---|---|---|---|---|
| Hostname | BVI IP | MAC addresses | Location | Notes | |
| PDAP-30 | 10.2.1.30 | bcf1.f276.a7e0/bcf1.f276.a7f0 | |||
| PDAP-31 | 10.2.1.31 | bcf1.f276.a920/bcf1.f276.a930 | |||
| PDAP-32 | 10.2.1.32 | ||||
| PDAP-33 | 10.2.1.33 | ||||
| PDAP-34 | 10.2.1.34 | 0038.df45.4cc0/0038.df45.4cd0 | |||
| PDAP-35 | 10.2.1.35 | 0038.df42.c440/0038.df42.c450 | Matt Cave | ||
| PDAP-36 | 10.2.1.36 | bcf1.f276.b1a0/bcf1.f276.b1b0 | Server room interior | ||
| PDAP-37 | 10.2.1.37 | ||||
| PDAP-38 | 10.2.1.38 | bcf1.f276.aaa0/bcf1.f276.aab0 | Plot cave | ||
| PDAP-39 | 10.2.1.39 | d42c.44d3.6960/d42c.44d3.6970 |
| Ubiquiti LBE-5AC-Gen2 | ||||||
|---|---|---|---|---|---|---|
| Hostname | IP | MAC Address | Mode | Location | Notes | |
| PDBR-1 | 10.3.1.1 | 24:5A:4C:3C:1B:AD | AP PtP | Server room | -> Wintermark | |
| PDBR-2 | 10.3.1.2 | 70:A7:41:44:2B:59 | Station PtP | |||
| PDBR-5 | 10.3.1.5 | 70:A7:41:44:29:D8 | AP PtP | Server room | -> Navar | |
| PDBR-6 | 10.3.1.6 | 70:A7:41:44:3C:28 | Station PtP | Navar toilets |
| Ubiquiti NanoBridge M5 | ||||
|---|---|---|---|---|
| Hostname | IP | MAC Address | Location | Notes |
| PDBR-3 | 10.3.1.3 | 24:A4:3C:B6:16:16 | Wintermark toilet | |
| PDBR-4 | 10.3.1.4 | 24:A4:3C:B6:14:3A | Server room |
| Cisco 1300 | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Hostname | Wireless IP | Wireless MAC | FastEthernet IP | BVI IP | Channel | Mode | Location | Config Status | Notes |
| bridge-a | 10.1.0.2 | 0026.cb6a.8db0 | 10.1.0.1 | 10.2.0.1 | 2412 | non-root bridge wireless-clients | - | ||
| bridge-b | 10.1.0.4 | 0023.5e0b.6b40 | 10.1.0.3 | 10.2.0.4 | 2437 | root bridge wireless-clients | - | ||
| bridge-c | 10.1.0.16 | 0017.e009.5f50 | 10.1.0.15 | 10.2.0.16 | - | ||||
| bridge-d | 10.1.0.18 | 0017.94a6.9b00 | 10.1.0.17 | 10.2.0.18 | OK | - | |||
| bridge-e | 10.1.0.40 | 001f.9ed3.3fe0 | 10.1.0.41 | 10.2.0.40 | OK | - | |||
| bridge-f | 10.1.0.42 | 0013.19a4.9fe0 | 10.1.0.43 | 10.2.0.42 | - |
Configuring 1600
PDCREW and PD_PUBLIC on the 2.4GHz radio, PD_BACK on 5GHz for mesh
- Process, copy the config below, edit it to replace the AP name and BVI address to match. Set the passwords
- Connect to the AP via the console port
- `enable` to get control
- `write erase` to clear the existing config
- `reload` confirm when promted. You do not want to copy any changes if asked
- when the AP has restarted, once again `enable`
- `conf t` to enter config mode
- paste in your config
- `write mem` to save the config
- wait for about a minute you should see chatter about the radio doing things
hostname PDAP-18 ! ! ! dot11 syslog dot11 vlan-name BACKHAUL vlan 1 dot11 vlan-name CREW vlan 12 dot11 vlan-name PUBLIC vlan 13 ! dot11 ssid PDCREW vlan 12 authentication open authentication key-management wpa mbssid guest-mode wpa-psk ascii ***** ! dot11 ssid PD_BACK authentication open authentication key-management wpa infrastructure-ssid wpa-psk ascii ***** ! dot11 ssid PD_PUBLIC vlan 13 authentication open mbssid guest-mode ! ! dot11 network-map dot11 guest ! ! bridge irb ! ! ! interface Dot11Radio0 no ip address ! encryption vlan 1 mode ciphers tkip ! encryption vlan 12 mode ciphers tkip ! ssid PDCREW ! ssid PD_PUBLIC ! mbssid dot11 dot11r pre-authentication over-ds dot11 dot11r reassociation-time value 200 world-mode dot11d country-code GB outdoor speed range power local maximum station-role root access-point ! interface Dot11Radio0.1 encapsulation dot1Q 1 native bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 spanning-disabled bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding ! interface Dot11Radio0.12 encapsulation dot1Q 12 bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 spanning-disabled bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding ! interface Dot11Radio0.13 encapsulation dot1Q 13 bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 spanning-disabled bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding ! interface Dot11Radio1 no ip address ! encryption mode ciphers tkip ! ssid PD_BACK ! world-mode dot11d country-code GB outdoor speed range power local maximum dot11 dot11r pre-authentication over-ds dot11 dot11r reassociation-time value 200 station-role root access-point fallback repeater bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding ! interface GigabitEthernet0 no ip address no ip route-cache duplex auto speed auto bridge-group 1 bridge-group 1 spanning-disabled no bridge-group 1 source-learning ! interface BVI1 ip address 10.2.1.18 255.0.0.0 no ip route-cache ! bridge 1 protocol ieee bridge 1 route ip ! interface dot11Radio 0 no shut interface dot11Radio 1 no shut interface BVI 1 no shut interface GigabitEthernet0 no shut end
Config file 702
Dot11 ssid PDCREW authentication open authentication key-management wpa wpa-psk ascii ****** Guest-mode Exit Int dot11 0 world-mode dot11d country-code GB outdoor speed range power local maximum encryption mode ciphers tkip dot11 extension aironet ssid PDCREW Stat root access No shut Exit Int dot11 1 world-mode dot11d country-code GB outdoor speed range power local maximum encryption mode ciphers tkip dot11 extension aironet ssid PDCREW station-role root access-point No shut exit