Wireless-New

Configuration

Server room IP 10.1.0.202

Cisco 1600
Hostname	BVI IP	MAC Address	Location	Notes
PDAP-1	10.2.1.1	ac7e.8a9b.e1f0/5897.bddd.7634
PDAP-2	10.2.1.2
PDAP-3	10.2.1.3	ac7e.8a9b.d320/ac7e.8aa3.c880
PDAP-4	10.2.1.4	ac7e.8a9b.d790/ac7e.8aa3.ccf0	Hall of Worlds
PDAP-5	10.2.1.5	ac7e.8a69.c1c0/ac7e.8a65.c180	Server room exterior
PDAP-6	10.2.1.6	ac7e.8a9b.d2a0/ac7e.8aa3.c7f0	God
PDAP-7	10.2.1.7
PDAP-8	10.2.1.8	44ad.d9e5.bce0/44ad.d9e9.bb50
PDAP-9	10.2.1.9	ac7e.8a69.be80/ac7e.8a65.be40
PDAP-10	10.2.1.10
PDAP-11	10.2.1.11	ac7e.8a9b.d280/ac7e.8aa3.c7d0
PDAP-12	10.2.1.12	ac7e.8a9a.1cc0/ac7e.8aa2.1230	WM toilet
PDAP-13	10.2.1.13	ac7e.8a9b.df00/ac7e.8aa3.d460	Navarr Woods
PDAP-14	10.2.1.14	ac7e.8a69.c250/ac7e.8a65.c210
PDAP-15	10.2.1.15	ac7e.8a9b.da30/ac7e.8aa3.cf90
PDAP-16	10.2.1.16	ac7e.8aa8.16e0/ac7e.8aaa.16f0	Bar
PDAP-17	10.2.1.17	04da.d2cf.a330/04da.d2d1.a150	Monster
PDAP-18	10.2.1.18	ac7e.8a69.b010/5897.bdb5.e6e7
PDAP-19	10.2.1.19	0c27.24e1.8d10/0c27.24e3.8d00	Navarr Toilets
PDAP-20	10.2.1.20	04da.d28a.0ca0/04da.d28c.0cd0

Cisco 702W
Hostname	BVI IP	MAC addresses	Location	Notes
PDAP-30	10.2.1.30	bcf1.f276.a7e0/bcf1.f276.a7f0
PDAP-31	10.2.1.31	bcf1.f276.a920/bcf1.f276.a930
PDAP-32	10.2.1.32
PDAP-33	10.2.1.33
PDAP-34	10.2.1.34	0038.df45.4cc0/0038.df45.4cd0
PDAP-35	10.2.1.35	0038.df42.c440/0038.df42.c450		Matt Cave
PDAP-36	10.2.1.36	bcf1.f276.b1a0/bcf1.f276.b1b0		Server room interior
PDAP-37	10.2.1.37
PDAP-38	10.2.1.38	bcf1.f276.aaa0/bcf1.f276.aab0	Plot cave
PDAP-39	10.2.1.39	d42c.44d3.6960/d42c.44d3.6970

Cisco 1300
Hostname	Wireless IP	Wireless MAC	FastEthernet IP	BVI IP	Channel	Mode	Location	Config Status	Notes
bridge-a	10.1.0.2	0026.cb6a.8db0	10.1.0.1	10.2.0.1	2412	non-root bridge wireless-clients	Navar		-
bridge-b	10.1.0.4	0023.5e0b.6b40	10.1.0.3	10.2.0.4	2437	root bridge wireless-clients	GOD -> Navarr		-
bridge-c	10.1.0.16	0017.e009.5f50	10.1.0.15	10.2.0.16					-
bridge-d	10.1.0.18	0017.94a6.9b00	10.1.0.17	10.2.0.18				OK	-
bridge-e	10.1.0.40	001f.9ed3.3fe0	10.1.0.41	10.2.0.40				OK	-
bridge-f	10.1.0.42	0013.19a4.9fe0	10.1.0.43	10.2.0.42					-

Configuring 1600

PDCREW and PD_PUBLIC on the 2.4GHz radio, PD_BACK on 5GHz for mesh

1. Process, copy the config below, edit it to replace the AP name and BVI address to match. Set the passwords
2. Connect to the AP via the console port
3. `enable` to get control
4. `write erase` to clear the existing config
5. `reload` confirm when promted. You do not want to copy any changes if asked
6. when the AP has restarted, once again `enable`
7. `conf t` to enter config mode
8. paste in your config
9. `write mem` to save the config
10. wait for about a minute you should see chatter about the radio doing things

hostname PDAP-18
!
!
!
dot11 syslog
dot11 vlan-name BACKHAUL vlan 1
dot11 vlan-name CREW vlan 12
dot11 vlan-name PUBLIC vlan 13
!
dot11 ssid PDCREW
   vlan 12
   authentication open
   authentication key-management wpa
   mbssid guest-mode
   wpa-psk ascii *****
!
dot11 ssid PD_BACK
   authentication open
   authentication key-management wpa
   infrastructure-ssid
   wpa-psk ascii *****
!
dot11 ssid PD_PUBLIC
   vlan 13
   authentication open
   mbssid guest-mode
!
!
dot11 network-map
dot11 guest
!
!
bridge irb
!
!
!
interface Dot11Radio0
 no ip address
 !
 encryption vlan 1 mode ciphers tkip
 !
 encryption vlan 12 mode ciphers tkip
 !
 ssid PDCREW
 !
 ssid PD_PUBLIC
 !
 mbssid
 world-mode dot11d country-code GB outdoor
 speed range
 power local maximum
 station-role root access-point
!
interface Dot11Radio0.1
 encapsulation dot1Q 1 native
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 spanning-disabled
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
!
interface Dot11Radio0.12
 encapsulation dot1Q 12
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 spanning-disabled
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
!
interface Dot11Radio0.13
 encapsulation dot1Q 13
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 spanning-disabled
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
!
interface Dot11Radio1
 no ip address
 !
 encryption mode ciphers tkip
 !
 ssid PD_BACK
 !
 world-mode dot11d country-code GB outdoor
 speed range
 power local maximum

 station-role root access-point fallback repeater
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
!
interface GigabitEthernet0
 no ip address
 no ip route-cache
 duplex auto
 speed auto
 bridge-group 1
 bridge-group 1 spanning-disabled
 no bridge-group 1 source-learning
!
interface BVI1
 ip address 10.2.1.18 255.0.0.0
 no ip route-cache
!
bridge 1 protocol ieee
bridge 1 route ip
!
interface dot11Radio 0
no shut
interface dot11Radio 1
no shut
interface BVI 1
no shut
interface GigabitEthernet0
no shut

end

Config file 702

Dot11 ssid PDCREW
authentication open
authentication key-management wpa
wpa-psk ascii ******
Guest-mode
Exit

Int dot11 0
world-mode dot11d country-code GB outdoor
speed range
power local maximum
encryption mode ciphers tkip
dot11 extension aironet
ssid PDCREW
Stat root access
No shut
Exit

Int dot11 1
world-mode dot11d country-code GB outdoor
speed range
power local maximum
encryption mode ciphers tkip
dot11 extension aironet
ssid PDCREW
station-role root access-point
No shut
exit